The crag, a natural climbing gym… better with Climbing Technology.

Finally the days are starting to get longer and it’s getting warmer with spring on its way. The climbing community can thus leave the indoor gyms where they have trained all winter and get back to the crag. There’s just one thing to think about when going to the crag: to take all the necessary material, from quickdraws to your belay device and from ropes to chalk so to have a fun day out but most importantly in complete safety. All this thanks to Climbing Technology’s products.

CLIMBING TECHNOLOGY AVISTA
The AVISTA harness is CLIMBING TECHNOLOGY’s new extremely light and ergonomic single-buckle technical harness, developed for high-level sport climbing and competitions. The anatomical construction has been designed to ensure excellent fit and freedom of movement: including the innovative seamless and compact belay loop and the leg loops that have been designed with an ultra-light elastic support that can be adjusted with a single hand. The shape and size of the leg loops enables excellent load distribution and the special fabric triangulation on the leg loops further improves comfort. The tying-in points have been reinforced and include a wear and tear indicator, it has two large rigid front gear loops characterized by their special inclination as well as two soft and flexible rear gear loops and a rear loop for accessories. Thanks to its soft and flexible structure it is easy to stow away.
Weight: 290 g (size M)

CLIMBING TECHNOLOGY CLICK UP
For your outings to the crag there is CLICK UP, the manual-braking belay device by CLIMBING TECHNOLOGY that allows for belaying a leader and belaying a top-roping climber with both hands handling the rope, or for lowering the climber. Lightweight and compact, the device bears the name of the 'click' sound that you can hear when it locks on the rope. It can be used with all 8.6÷10.5 mm single ropes. Very easy to use, CLICK UP allows the belayer to pay out rope quickly and smoothly and to arrest a fall by simply holding the free end of the rope. To lower off the climber, the belayer will only need to apply a slight pressure over the device, while keeping under tension the free end of the rope. CLICK UP assures effective belaying even if the rope is incorrectly installed through the device (the strands of the rope are inverted) thanks to the specific V-shaped, tapered friction notches that allow the user to hold a fall and easily lower the climber.
CLICK UP is supplied and must be used together with CONCEPT SGL HC, the dedicated carabiner with wear-resistant anodized finish and ACL system that prevents the possibility of loading the minor axis.
Weight: 115 g (the weight refers to the device only)

CLIMBING TECHNOLOGY MORFO NY PRO SET
The MORFO NY PRO SET quickdraw is CLIMBING TECHNOLOGY’s new ergonomic, high-performance and robust quickdraw, equipped with hot-forged carabiners with tapered slings. These quickdraws are ideal for high-level sport climbing. The MORFO NY PRO SET have a dynamic and modern design and are one of the lightest in its category. The snag free shape of the nose has been specially designed to have maximum freedom of clipping and the curved shape of the spine makes it easier to grip. The upper carabiner has a straight gate with an ergonomic diagonal indentation and the lower carabiner has a hot-forged shaped gate. The areas that come into contact with the anchor and the rope have been reinforced to ensure maximum lifespan of the carabiner even with intense use. The ultralight sling made from ultra-high molecular weight polyethylene has a variable width (25/16 mm), its reduced thickness makes it very flexible and not very bulky. The MORFO NY PRO SET is equipped with the Fixbar retaining support on both carabiners, which prevents rotation during use and protects the sling from wear and tear. The quickdraw is available in the following lengths: 12, 17 and 22 cm.
Weight: 107 g (12 cm version), 109 g (17 cm version), 113 g (22 cm version)

CLIMBING TECHNOLOGY FALESIA
The name of this duffel bag/backpack references its purpose – to pack away everything you will need for a fun free-climbing days on the crags. The CLIMBING TECHNOLOGY FALESIA has a full-length zipper along its spine for quick access and easy packing. The front, which rests on the ground, is made from PVC to ensure that the shoulder straps and back stay clean. A roomy 45 L, it also includes a large rope tarp. Just tuck away the shoulder straps and the hip belt in their pockets and pull out the hideaway hand-grips to convert the FALESIA to the perfect hand luggage for your travels.
Dimensions: 55 x 35 x 20 cm

CLIMBING TECHNOLOGY SPORT CHAIN
The SPORT CHAIN is CLIMBING TECHNOLOGY’s innovative daisy chain with loops made of a single layer Dyneema webbing and equipped with a SALTO SG screw gate carabiner. It is ideal on multi-pitch routes, for self-belaying, for abseiling and as an étrier. At the crag it can be used as a lanyard for self-belaying and abseiling. The SPORT CHAIN is equipped with an innovative loop for connection to the harness (registered design) with six large intermediate loops and a sling at the end. The single loop construction reduces the possibility of error and the danger of it becoming detached from the chain, typical of traditional daisy chains.
Length: 100cm
Weight: 120g

About CLIMBING TECHNOLOGY
Over 30 years of experience, a strong passion for their work and a particular attention to the design and production of all personal protective equipment. This is where Climbing Technology's products come from, derived from the brand's expertise developed for three different fields: the mountain, with mountaineering and sport climbing, the professional world - with work at height, rope work and rescue - and the recreational sector, with via ferratas and adventure parks. Constant research into innovative solutions has enabled the company to create devices capable of meeting the most advanced technical and sporting requirements. Safety, functionality and simplicity: these are the characteristics to which the products in the CT catalogue must respond. The company's research and development activities are constant and the company has registered 20 patents at international level.Climbing Technology, a company founded in Cisano Bergamasco by Carlo Paglioli in 1986, became part of the SKYLOTEC family in the mid-2021 and currently employs 115 people and exports to 70 countries worldwide.

For further information: www.climbingtechnology.com