Safe summer mountaineering with Climbing Technology

Only those who have experienced summer mountaineering can fully understand its beauty. Getting up before dawn to face a climb on snow and rock, in a hostile environment where you have to think about every single step and take into consideration a multitude of factors for your safety and that of your climbing partners. To move on these adverse terrains you need experience, an excellent physical condition, good technical knowledge and above all suitable equipment such as the simple and functional equipment made by Climbing Technology.

CLIMBING TECHNOLOGY ASCENT
ASCENT is the versatile harness that CLIMBING TECHNOLOGY has designed for all-round use, from sport climbing to winter mountaineering. Equipped with four adjustment buckles for optimal fit, ASCENT features a durable and ergonomic waist belt that provides greater lumbar support. The harness is lined with quick-drying, breathable mesh to ensure maximum comfort even during the hottest days and prolonged use; in addition, the lower tie-in point is equipped with a wear indicator to help determine when the harness is worn out and needs to be retired. Thanks to the new leg-loop design and construction, with dimensions in the crotch area that have been reduced to minimize chafing, ASCENT provides a balanced load distribution during suspension. In addition to the four gear loops - two wider and two smaller ones, ideal for placing accessories - ASCENT is equipped with two slots to accommodate a tool-carrying carabiner or hammer holster, plus a rear loop for the chalk bag. Weight: 430 g (size M-L)

CLIMBING TECHNOLOGY SALTO SG
The SALTO SG carabiner is CLIMBING TECHNOLOGY’s compact and multi-purpose screw gate carabiner made from light alloy, designed for mountaineering and sport climbing. Dynamic and modern design, its robust structure is intended for multi-purpose use and it can withstand high work loads. The area where the rope passes on carabiner the has been increased and both the external and internal profiles have an uninterrupted form to avoid snagging. The snag free shape of the nose is characterized by a wide opening for maximum freedom of clipping and it has been specially tapered to allow easy insertion into anchors. The SALTO SG has a screw gate that allows you to build belays and make links. Weight: 47 g

CLIMBING TECHNOLOGY NUPTSE EVO CLASSIC FLEX
For classic mountaineering, from couloirs to ridges with mixed climbing and easy goulottes, CLIMBING TECHNOLOGY has created the NUPTSE EVO CLASSIC FLEX, a classic 12-point crampon with a hardened steel structure. The frontal points are shaped for better grip on ice, the wide support bands made from polymeric material facilitates the fit on any type of boot and the heel piece with rear flaps ensures precise positioning of the boot on the crampon even for smaller sizes. The NUPTSE EVO CLASSIC FLEX features a flexible adjustment bar which enables them to be used with non-rigid boots and a double lever system for size adjustment that is easily operated with just one hand allowing you to easily switch between the two measurements: EU 36÷43 / 42÷47. The crampons are equipped with interchangeable interlocking antibotts equipped with bellows to prevent snow build-up beneath the crampon. Weight: 950g

CLIMBING TECHNOLOGY DRON+
It's called the DRON+ and it's a multi-purpose technical ice axe designed by CLIMBING TECHNOLOGY for couloirs, classic slopes on north faces and ridges with mixed climbing. The hot-forged steel head of the DRON+ is equipped with a shovel and is characterized by it’s ergonomic shape that enables a better grip and greater effectiveness of use. Furthermore, the tapered ergonomic handle guarantees optimal grip, the tapered handle is made of light alloy with an anodized finish and its structure is straight at the base, ensuring more effective penetration into the snow. The head and tip are equipped with holes for a carabiner or a sling. Included in the CLIMBING TECHNOLOGY DRON+ set is an adjustable leash, the DRAG-TOUR. The DRAG-TOUR can be adjusted according to the width of your wrist and the thicker edge guaranteed a comfortable fit around your wrist.
Classic drag (Drag Tour model) included.
Available lengths: 52-59-66 cm Weight: 470 g (52 cm version without the leash)

CLIMBING TECHNOLOGY CRIC
CRIC is the multi-function rope clamp designed by CLIMBING TECHNOLOGY for mountaineering, rescue and rope access work. Durable, practical and intuitive to use, it offers four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley. Its versatility, compact design and ease of use help minimize time, material and room needed for rope manoeuvres. When in ascender mode, it allows ascending the rope in accordance with EN 567 / EN 12841-B standards; when it is in pulley mode, it can be used as a simple pulley for lifting or transferring a load, as the rope is free to run in both directions. In progress-capture hauling pulley mode, it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in case of a fall in a crevasse, since the rope is free to run in one direction but is locked in the opposite one. In progress-capture hauling pulley mode it is also possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device. Thanks to the user-friendly opening via an intuitive release button, the device can be swiftly installed on the rope in any of its different modes of use, even with gloves on or while operating in difficult conditions. In addition, CRIC is equipped with a steel cam featuring teeth that minimize rope wear but are very effective in blocking the rope, when so needed. In addition, the cam is designed with two slots that reduce the build-up of dirt, to maintain the lock on the rope very efficient in any condition. Caution! This product is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing. Weight: 150 g

About CLIMBING TECHNOLOGY
Over 30 years of experience, a strong passion for their work and a particular attention to the design and production of all personal protective equipment. This is where Climbing Technology's products come from, derived from the brand's expertise developed for three different fields: the mountain, with mountaineering and sport climbing, the professional world - with work at height, rope work and rescue - and the recreational sector, with via ferratas and adventure parks. Constant research into innovative solutions has enabled the company to create devices capable of meeting the most advanced technical and sporting requirements. Safety, functionality and simplicity: these are the characteristics to which the products in the CT catalogue must respond. The company's research and development activities are constant and the company has registered 20 patents at international level.
Climbing Technology, a company founded in Cisano Bergamasco by Carlo Paglioli in 1986, became part of the SKYLOTEC family in the mid-2021 and currently employs 115 people and exports to 70 countries worldwide.

Info: www.climbingtechnology.com